AdvancedTCA, CompactPCI, Embedded Computers, Motherboards, Systems, Industrial PC, Computer-on-Modules, Boards & Mezzanines, HMIs & Displays, System & Platforms, Ruggedized Servers Recab

The TVME220 is a 6U VMEbus Carrier for up to 4 single-size or two double-size IndustryPack (IP) modules allowing to build up modular, flexible and cost effective I/O solutions for all kinds of applications like process control, medical systems, telecommunication and traffic control.
The TVME220 uses VME64x-compliant connectors to increases the quantity of rear I/O connections beyond that of standard VME. All of the 200 I/O lines from the 4 IP slots are available at the VME64x connectors P0 and P2. The I/O mapping is compliant to the ANSI/VITA 4.1-1996 standard.
Although the rear connectors are VME64x, the electrical interface is standard VME, so that nearly all CPU products still have full access to the IP modules mounted on the TVME220.
Status indicators for IP access, +5V and +/-12V are provided in the EMI shielded front panel.
A set of 16-position rotary switches allows easy configuration of VME Short I/O and Memory addresses. Interrupt routing from the IP slots to the VME IRQs can be done in two ways: programmable by software or selection of predefined sets by a rotary switch.
The IP-power lines are fuse protected by self healing fuses and RF filtered. The operating temperature ranges between -40°C and +85°C.
Two Transition Modules, TVME001-TM-10 and TVME002-TM-10 are available for easy access to all IP I/O lines.

Features

• VMEbus Slave Interface: VME64 specification (ANSI / VITA 1-1994) and VME64x specification (ANSI/VITA 1.1-1997) compliant slave interface
• Size: Single Size 6 U Euro Card with EMI front panel
• Short I/O: VME A16, D08/16
  Address Modifier: 29, 2D
  Size: 1 Kbytes (256 Bytes/IP)
• Standard Memory: VMEA 24, D08/16
  Address Modifier: 39, 3A, 3D, 3E
  Size: programmable from 32 Kbytes to 2 Mbytes per IP
• Extended Memory: VME A32, D08/16
  Address Modifier: 09, 0A, 0D, 0E
  Size: fixed, 8 Mbytes per IP
• Interrupts: VME IRQ1-7
• IP Interface: ANSI / VITA 4-1995 compliant interface to IndustryPack modules
• IP Slots: Four single size or two double size IP slots with back I/O
• Mapping of IP Interrupts to VMEbus: Programmable by software or selection of predefined sets by a rotary switch
• I/O access: ANSI/VITA 4.1-1996 compliant mapping of IP I/O lines to VME64x connectors P0 and P2
• DMA: Not supported
• 32 MHz: Not supported
• 32 Bit: Not supported
• Status LEDs: ACK LED for each IP slot
  +5V Power LED for each IP slot
  +12V and -12V Power LED
• Protection: Self healing fuses and RF-filtering on all IP power lines
• Power Requirements without IP Modules: 350mA typical @ +5V DC
  1mA typical @ +12V DC
  1mA typical @ -12V DC Additional Power is required by IP modules
• Temperature Range: Operating: -40°C to +85 °C
  Storage: -40°C to +85°C
• Humidity: 5-95% non-condensing
• MTBF: 382000 h
• Weight: 310 g